SB700 EX

SB700 EX 2-Port Serial to Ethernet Server Add secure network connectivity to your product with SSH and SSL

Key Points
- Serial to Ethernet server
- SSL and SSH data encryption to protect from unauthorized monitoring
- RS-232 and RS-422/485 serial device support
- Works out of the box - no programming is required
- Metal enclosure
- Rebrand with your custom product label
- Customize with development kit
Features
- SSH, SSL, HTTPS, certificate support
- 10/100Mbps Ethernet
- TCP/UDP/Telnet modes
- DHCP/Static IP modes
- Web based configuration
- 32-bit performance
- Standard and custom baud rates with factory application
Optional
The following options are available with the optional development kit:
- Customize any aspect of operation including web pages, data filtering, or custom network applications
- Real-time clock
- Network Time Protocol (NTP) support
- Micro SD/MMC Card interface with included flash file system
The following optional software modules are not included with kit and are sold separately
- Embedded SSL & SSH Security Suite (Module License Version)
- SNMP

100 Version

Buy online Datasheet(pinout & signal description)

All NetBurner Serial to Ethernet Servers come preloaded with software to translate serial and Ethernet data, and is configurable through any web browser. The application code can be customized to any specific application requirements with a development kit.

Network-enable existing applications

The serial to Ethernet server network-enables serial devices right out of the box - no programming or development is required. The hardware is pre-programmed to convert your serial data to Ethernet, enabling communication with the serial device over a network or the Internet. The onboard web server provides easy device configuration using a standard web browser

Serial tunnel

By using two NetBurner serial to Ethernet devices you can create a “serial tunnel” that enables two serial devices to communicate over an IP network, even if both of your serial devices have no network capabilities. The IP connection between the two devices will be transparent to the serial devices.

Network enable your current PC Software

The included virtual COM port Windows utility enables you to easily access serial devices located on a remote NetBurner device as if they were plugged into your own computer. When the attached serial port device sends communication data, it is actually transmitted over a TCP/IP or UDP network and back from the network to your serial device.

Software specifications

Configuration through web browser and the NetBurner IPSetup utility
Password protection
Firmware updates through network or serial connections

Serial Port Baud Rate

Factory application supports up to 921,600 bps. Custom rates available with development kit.

Serial Protocols Supported

RS-232, RS-422, and RS-485

Serial Configurations
The two UARTs can be configured in the following ways:

Two RS-232 ports
One RS-232 port, one RS-485/422 port

Processor & Memory

32-bit Freescale ColdFire 5272 running at 62.5MHz with 2MB of flash and 8MB of SDRAM.

Storage

SD/MMC Flash Card Interface (with SDHC support)

Network Interface

10/100 BaseT with RJ-45 connector

Data I/O Interface

Two UARTs
Real-time clock

LEDs

Link, Speed/Data, Power

Physical Characteristics

Dimensions (inches): 4.20" x 3.25” x 1.00”

Power

DC Input Voltage: 7-24V
12V @ 90mA

Environmental Operating Temperature

-40° to 85° C (SB700EX-100IR version)
0° to 70° C (SB700EX-100CR version)

RoHS Compliance

The Restriction of Hazardous Substances guidelines ensure that electronics are manufactured with fewer environment harming materials.

Virtual COM Port Driver

This windows utility enables you to easily share serial port devices over the network (Internet or LAN) with NetBurner devices. When the attached serial port device sends communication data, it is actually transmitted over TCP/IP network and back from the network to your serial device.
Download : Virtual COM Port Driver

IPSetup

IPSetup is a Windows program used to configure NetBurner hardware through a network connection. Running IPSetup will automatically identify your NetBurner device (even if its IP address is 0.0.0.0).
Download : IPSetup

MTTTY Serial Terminal

MTTTY (Multi-Threaded TTY) is an easy to use Windows serial communications program.
Download : MTTTY Serial Terminal

AutoUpdate

AutoUpdate will download a new code image to your NetBurner device. This update can be done from any point that has network access. AutoUpdate can be run as a Windows GUI application or command line.
Download : AutoUpdate

SB700 EX Development Kit Powerful Hardware and Software that Makes Building Applications Easier

Need a custom solution?
Customize any aspect of operation including web pages, data filtering, or custom network applications.

A complete hardware & software solution
Every component including the hardware, software and developer tools is designed by NetBurner to work together seamlessly.

Kit enables communication with peripherals that use:

Real-time clock
Network Time Protocol (NTP) support
Micro SD/MMC Card interface with included flash file system

Eclipse Based IDE

NBEclipse is a plug-in to the Eclipse IDE and provides a great environment to manage projects, edit code, debug, and download your application to NetBurner devices.

Software Libraries