CB34 EX

CB34 EX 2-Port CAN to Ethernet Server Add device connectivity to your industrial serial RS-232/RS-485/CAN product via 10/100 Ethernet

Key Points
- Serial to Ethernet server
- CAN device support (programming required)
- DeviceNet compliant
- RS-232 and RS-422/485 serial device support
- Works out of the box - no programming is required
- Metal enclosure
- Rebrand with your custom product label
- Customize with development kit
Features
- Power via two position terminal block, TSTRIP5, serial port, or barrel connector
- 10/100Mbps Ethernet
- TCP/UDP/Telnet modes
- DHCP/Static IP modes
- Web based configuration
- 32-bit performance
- Industrial Temperature Range (-40°C to 85°C)
Optional
The following options are available with the optional development kit:
- Customize any aspect of operation including web pages, data filtering, or custom network applications
- Additional baud rates
- CAN device support
- eTPU coprocessor
- Two bi-color programmable LEDs
The following optional software modules are not included with kit and are sold separately
- Embedded SSL & SSH Security Suite (Module License Version)
- SNMP

100 Version

Buy online Datasheet(pinout & signal description)

All NetBurner Serial to Ethernet Servers come preloaded with software to translate serial and Ethernet data, and is configurable through any web browser. The application code can be customized to any specific application requirements with a development kit.

Network-enable existing applications

The serial to Ethernet server network-enables serial devices right out of the box - no programming or development is required. The hardware is pre-programmed to convert your serial data to Ethernet, enabling communication with the serial device over a network or the Internet. The onboard web server provides easy device configuration using a standard web browser

Serial tunnel

By using two NetBurner serial to Ethernet devices you can create a “serial tunnel” that enables two serial devices to communicate over an IP network, even if both of your serial devices have no network capabilities. The IP connection between the two devices will be transparent to the serial devices.

Network enable your current PC Software

The included virtual COM port Windows utility enables you to easily access serial devices located on a remote NetBurner device as if they were plugged into your own computer. When the attached serial port device sends communication data, it is actually transmitted over a TCP/IP or UDP network and back from the network to your serial device.

Software specifications

Configuration through web browser and the NetBurner IPSetup utility
Password protection
Firmware updates through network or serial connections

Serial Port Baud Rate

Factory application supports up to 115,200 baud. Custom rates available with development kit.

Serial Protocols Supported

RS-232, RS-422, RS-485, DeviceNet compliant and CAN (programming required)

Serial Configurations
The two UARTs can be configured in the following ways:

One RS-232 port, one RS-485 port
One RS-485 port (full or half duplex on TSTRIP5), one RS-485 port (half-duplex on DB9)
One RS-232 port, one CAN port (programming required)
One RS-485 or RS-232 port, one CAN port (programing required)

Processor & Memory

32-bit Freescale ColdFire 5234 running at 147.5MHz with 8MB SDRAM, and 2MB Flash.

Network Interface

10/100 BaseT with RJ-45 connector

Data I/O Interface

Two UARTs
CAN Interface

Storage

SD/MMC Flash Card Interfece (with SDHC support)

LEDs

Link, speed/data, power, and two bi-color general purpose programmable LEDs

Physical Characteristics

Dimensions (inches): 4.20" x 3.25” x 1.00”

Power

DC Input Voltage: 7V-24V

Environmental Operating Temperature

-40° to 85° C

RoHS Compliance

The Restriction of Hazardous Substances guidelines ensure that electronics are manufactured with fewer environment harming materials.

Virtual COM Port Driver

This windows utility enables you to easily share serial port devices over the network (Internet or LAN) with NetBurner devices. When the attached serial port device sends communication data, it is actually transmitted over TCP/IP network and back from the network to your serial device.
Download : Virtual COM Port Driver

IPSetup

IPSetup is a Windows program used to configure NetBurner hardware through a network connection. Running IPSetup will automatically identify your NetBurner device (even if its IP address is 0.0.0.0).
Download : IPSetup

MTTTY Serial Terminal

MTTTY (Multi-Threaded TTY) is an easy to use Windows serial communications program.
Download : MTTTY Serial Terminal

AutoUpdate

AutoUpdate will download a new code image to your NetBurner device. This update can be done from any point that has network access. AutoUpdate can be run as a Windows GUI application or command line.
Download : AutoUpdate

CB34 EX Development Kit Powerful Hardware and Software that Makes Building Applications Easier

Need a custom solution?
Customize any aspect of operation including web pages, data filtering, or custom network applications.

A complete hardware & software solution
Every component including the hardware, software and developer tools is designed by NetBurner to work together seamlessly.

Kit enables communication with peripherals that use:

CAN device support
eTPU coprocessor
Two bi-color programmable LEDs
Additional baud rates

Eclipse Based IDE

NBEclipse is a plug-in to the Eclipse IDE and provides a great environment to manage projects, edit code, debug, and download your application to NetBurner devices.

Software Libraries