PINK Kit Enable your BASIC Stamp or Propeller Microcontroller to communicate over a network or the Internet
 

 

  • Features

    • Embedded Web Server with 256K Flash Memory for web pages and files
    • FTP interface for uploading web pages and files
    • Telnet interface for debugging serial communication
    • Send/Receive UDP Packets on any port
    • Send E-mail with or without SSL Authentication
    • Password protection of configuration, FTP and selected web pages and files
    • Over 100 web-accessible variables, allowing for dynamic web pages
    • Over 20 variables can be written to flash memory for default values
    • Serial access to PINK IP Address, Network Mask, Default Gateway and DNS Server info
  • 1
 

 

  • How to use
  • Factory App
  • Hardware
  • Kit
  • PINK Module
  • Documentation & Downloads
  • Price

The PINK network-enables your BASIC Stamp®, SX or Propeller Microcontroller enabling it to communicate over a network or even the Internet. Features include a web server, sending e-mail, UDP messages to alert you to events or provide status messages, and much more (see the list of features below). Communication with the host controller is done using a simple TTL serial interface.

Quickly enable your microcontroller to communicate over an Ethernet network

In addition to the features mentioned above, the following features have been added to the PINK Factory Application.

  • E-Mail Authentication Supported (Plain Text or SSL)
  • Current IP Address, Subnet Mask, Gateway and DNS available as variables
  • UDP Port can now be changed to any valid port number
  • Variable for IP Address of last incoming UDP Packet
  • Minor Code Enhancements (Performance & BASIC Stamp Compatibility)

Power Requirements:
5 VDC @ ~350 mA (500 mA power supply recommended)

If you need the 3.3V version of this device, please see the PINK LC module product page.

 

Communication:
TTL non-inverted serial interface

Dimensions:

3.25" x 2.00" (82.55 mm x 50.8 mm)

Operating Temperature:

0 to 70 °C (PINK)

PINK Kit Enable microcontrollers to communicate over a network or the Internet
 



 

If you need the 3.3V version of this device, please see the PINK LC module product page.


Kit Includes
  • PINK Module (SB70-100CR module pre-loaded with PINK application)
  • Blue CAT5 Patch Cable
  • Red CAT5 Cross-over Cable
  • Grey Serial Cable
  • Power Supply
  • Adapter Board Connector Ribbon
  • Adapter Board
  • Hookup Wires
 

 

The PINK Module is a standard NetBurner board loaded with PINK firmware.

Can I buy the standard hardware and load the PINK firmware myself?



Yes! You can purchase the standard modules and load them with the PINK Factory Application. To do this you will need the NetBurner AutoUpdate tool and the latest factory application.

Which NetBurner board do I purchase?
1) If you would like to create a PINK (5V), you will need to purchase the SB70-100CR and load it with the PINK Factory Application.
2) If you would like to create a PINK LC (3.3V), you will need to purchase the SB70LC-100IR and load it with the PINK LC Factory Application.

 

 

Part Number
NNDK-PINK-KIT
SB70-100CR
Qty. 1
$130
$79