SB70 LC

SB70 LC 2-Port Serial to Ethernet Server Add secure network connectivity to your product with SSH and SSL

Key Points
- Serial to Ethernet server
- SSL and SSH data encryption to protect from unauthorized monitoring
- 3.3V tolerant input and TTL serial device support
- Works out of the box - no programming is required
- Board level product
- Customize with development kit
Features
- SSH, SSL, HTTPS, certificate support
- 10/100Mbps Ethernet
- TCP/UDP/Telnet modes
- DHCP/Static IP modes
- Web based configuration
- 32-bit performance
- RS-232 and RS-422/485 ready (require external level shifter)
Optional
The following options are available with the optional development kit:
- Customize any aspect of operation including web pages, data filtering, or custom network applications
- Additional baud rates
- SD/MMC Card interface with included flash file system
- Up to 15 Digital I/O
- I2C and SPI peripheral interface
- External timer input
The following optional software modules are not included with kit and are sold separately
- Embedded SSL & SSH Security Suite (Module License Version)
- SNMP

100 Version has RJ-45 jack • 200 Version has 10-pin header

Buy online Datasheet(pinout & signal description)

All NetBurner Serial to Ethernet Servers come preloaded with software to translate serial and Ethernet data, and is configurable through any web browser. The application code can be customized to any specific application requirements with a development kit.

Network-enable existing applications

The serial to Ethernet server network-enables serial devices right out of the box - no programming or development is required. The hardware is pre-programmed to convert your serial data to Ethernet, enabling communication with the serial device over a network or the Internet. The onboard web server provides easy device configuration using a standard web browser

Serial tunnel

By using two NetBurner serial to Ethernet devices you can create a “serial tunnel” that enables two serial devices to communicate over an IP network, even if both of your serial devices have no network capabilities. The IP connection between the two devices will be transparent to the serial devices.

Network enable your current PC Software

The included virtual COM port Windows utility enables you to easily access serial devices located on a remote NetBurner device as if they were plugged into your own computer. When the attached serial port device sends communication data, it is actually transmitted over a TCP/IP or UDP network and back from the network to your serial device.

Software specifications

Configuration through web browser and the NetBurner IPSetup utility
Password protection
Firmware updates through network or serial connections

Serial Port Baud Rate

Factory application supports up to 230,000 bps. Custom rates available with development kit.

Serial Protocols Supported

2 TTL

Serial Configurations
The UARTs can be configured in the following way:

Two TTL ports
Add external level shifter for RS-232
Add external level shifter for RS-422/485 (up to two ports)

Note: UART 0/1 also provide RTS/CTS hardware handshaking signals.

Processor & Memory

32-bit Freescale ColdFire 5270 running at 147.5MHz with 512KB of flash and 8MB SDRAM.

Network Interface

10/100 BaseT with RJ-45 connector (100 Version)
10-pin header (200 Version)

Data I/O Interface

Up to two TTL ports
Up to 15 digital I/O
Up to one timer input
Up to one I2C and SPI peripheral interface

LEDs

Link, Speed/Data, Power

Physical Characteristics

Dimensions (inches): 2.70” x 1.75”
Weight: 1 oz.
Mounting Holes: 4 x 0.125” dia.

Power

DC Input Voltage: 3.3V @ 250mA typical

Environmental Operating Temperature

-40° to 85° C

RoHS Compliance

The Restriction of Hazardous Substances guidelines ensure that electronics are manufactured with fewer environment harming materials.

Virtual COM Port Driver

This windows utility enables you to easily share serial port devices over the network (Internet or LAN) with NetBurner devices. When the attached serial port device sends communication data, it is actually transmitted over TCP/IP network and back from the network to your serial device.
Download : Virtual COM Port Driver

IPSetup

IPSetup is a Windows program used to configure NetBurner hardware through a network connection. Running IPSetup will automatically identify your NetBurner device (even if its IP address is 0.0.0.0).
Download : IPSetup

MTTTY Serial Terminal

MTTTY (Multi-Threaded TTY) is an easy to use Windows serial communications program.
Download : MTTTY Serial Terminal

AutoUpdate

AutoUpdate will download a new code image to your NetBurner device. This update can be done from any point that has network access. AutoUpdate can be run as a Windows GUI application or command line.
Download : AutoUpdate

SB70 LC Development Kit Powerful Hardware and Software that Makes Building Applications Easier

Need a custom solution?
Customize any aspect of operation including web pages, data filtering, or custom network applications.

A complete hardware & software solution
Every component including the hardware, software and developer tools is designed by NetBurner to work together seamlessly.

Kit enables communication with peripherals that use:

SD/MMC Flash Card (including SDHC)
Up to 15 Digital I/O
I2C and SPI peripheral interface
Additional baud rates

Eclipse Based IDE

NBEclipse is a plug-in to the Eclipse IDE and provides a great environment to manage projects, edit code, debug, and download your application to NetBurner devices.

Software Libraries